Specifications
Ribbon Specifications by Model
Ribbon Specifications by Model
Refer to the table that follows for ribbon specifications for your type of printer.
Note • Match the ribbon to the label width and printhead width that you are using.
Specifications
Printhead
resolution
Ribbon width
Minimum
Ribbon width
Maximum
Standard length
with 2:1 label to
ribbon ratio
Standard length
with 3:1 label to
ribbon ratio
Ribbon core inside
diameter
Maximum ribbon
roll outside
diameter
136
• Ribbon must be wound with the coated side out.
• Ribbon should be at least as wide as the labels to protect the printhead
from excessive wear.
BP THT
300X-Plus II
300 dots/inch
(12 dots/mm)
0.79 in. (20 mm)
4.33 in. (110 mm)
984 ft (300 m)
1476 ft (450 m)
1.0 in. (25.4 mm)
3.2 in. (81.3 mm)
BP THT
600X-Plus II
600 dots/inch
(24 dots/mm)
0.79 in. (20 mm)
3.40 in. (87 mm)
984 ft (300 m)
1476 ft (450 m)
1.0 in. (25.4 mm)
3.2 in. (81.3 mm)
Bradyprinter THT X-Plus II Series User Guide
BP THT
360X-Plus II
300 dots/inch
(12 dots/mm)
2.0 in. (51 mm)
6.7 in. (170 mm)
984 ft (300 m)
1476 ft (450 m)
1.0 in. (25.4 mm)
3.2 in. (81.3 mm)