Connecting A Digital Camera To Your Printer; Inserting And Removing Memory Cards; Inserting A Memory Card - Olivetti MY_WAY Plus User Manual

CONNECTING A DIGITAL CAMERA TO YOUR PRINTER

1 Turn on your digital camera. Read your camera's User's Guide for more information.
2 With your printer powered on, plug one end of the digital camera's USB cable to the USB connector on
the camera.
3 Open the printer's left outer door by pressing the upper centre part of the door to release it. Plug the
other end of the USB cable into the printer's USB connector.
When you connect a PictBridge-compliant digital camera to your printer, the print icon on the control
panel will turn off to indicate that printing will be controlled directly from the digital camera. Read your
camera's User's Guide for instructions on how to print your photos.

INSERTING AND REMOVING MEMORY CARDS

Your printer can read the following memory storage devices: Compact Flash I, II, Microdrive,
SmartMedia, SecurDigital and MultiMedia cards, Memory Sticks (Duo, Pro, Magic Gate) and xD-Picture
cards.
note: Adaptors for reading Mini SD and MS Pro memory cards can be purchased separately.
Your printer can recognize and print the following file formats stored on the memory cards: DCF, JPEG,
Extif and DPOF.

Inserting a Memory Card

• When inserting a CompactFlash card, make sure that the label is facing upward (if the label has an
arrow it needs to be pointing towards the printer) with the metal pinholes entering the printer first.
• When inserting a Multimedia and SecureDigital cards, make sure that the angled corner is on the
right and the metal contacts are facing downward.
• When inserting a SmartMedia card or a Memory Stick, make sure that the angled corner is on the
right and the metal contacts are facing upward.
• When inserting a xD-Picture Card, make sure the curved side of the card is facing you and the metal
contacts are facing downward.
10 CHAPTER 1