Olivetti Fax-Lab S95 Instructions Manual page 49

1. Lower the handset and place it on a stable surface (fig. 1).
2. Open and lift the operator console as indicated by the arrows
(fig. 2).
3. Move the print carriage to the left-hand edge of the fax machine
(fig. 3).
4. Release the paper feed roller by pressing the lever, as indicated
by the arrow (fig. 4).
5. Remove the roller from its compartment (fig. 5).
6. Clean the glass surface of the optical reader with a cloth damp-
ened with a product designed specifically for cleaning glass and
then dry it thoroughly (fig. 6).
Warning!
Do not pour or spray the cleaning product directly onto
the glass surface.
7. Place one end of the roller on the pin situated on the left-hand side
of the fax machine, as indicated by the arrow (fig. 7).
8. Engage the roller by pressing the lever, as indicated by the arrow
(fig. 8).
9. Close the operator console and put the handset back on its sup-
port.
N O T E
To check whether the optical reader is clean, make a copy of a blank
sheet. If any vertical lines appear on the copy and the optical reader
looks perfectly clean, contact qualified technical staff.
T
O CLEAN THE CASING
1. Unplug the fax machine from the power outlet and the
telephone socket.
2. Use exclusively a soft, lint-free cloth dampened with a neutral
detergent diluted with water.
T
O REMOVE JAMMED DOCUMENTS
During transmission or copying, a document could get jammed
(this condition is signalled by the display showing the message: "RE-
MOVE DOCUMENT, PRESS
Try to unload the document by pressing the
ment is not unloaded, remove it manually as follows:
or
Remove the document, taking care not to tear it.
T
O REMOVE JAMMED SHEETS OF PAPER
If the paper used to print the documents received or to copy docu-
ments gets jammed, this error is signalled on the display by the mes-
sage "PAPER ERROR, PRESS
Try to unload the sheet by pressing the
unloaded, remove it manually as follows:
or
Remove the sheet, taking care not to tear it.
").
key. If the docu-
".
key. If the sheet is not
25