Olivetti Fax-Lab S95 Instructions Manual page 44

E
RROR CODES
The error codes printed both on the transmission report and the
activity report consist of two digits indicating the cause of the error.
To save space, the two-digit code without any message is printed on
the activity report.
CODE MESSAGE
OK No message. Operation performed
successfully.
02 IMPOSSIBLE CONNECTION
03 RECEIVER DOES NOT ANSWER
04 ERR. WHILE TRANSMITTING
RESEND FROM PAGE: nn
05 RESEND PAGES:
nn, ..... nn
07 DOCUMENT TOO LONG
08 CHECK THE DOCUMENT
09 STOP PRESSED
10 No message
11 No message
13 ERRORS WHILE POLLING
16 POWER FAILURE ON PAGE nn
(OK) No message
OCC LINE BUSY
20
CAUSE OF ERROR
The fax machine does not detect any
dialling tone or receives an irregular signal.
The correspondent is not answering or is a
fax machine.
An error occurred during transmission. "nn"
= number of page on which the error was
found.
The correspondent's fax machine found
errors during reception. "nn" = number of
page on which the error was found.
The document to be sent is too long. The
time taken to send it exceeds the allowed
limits.
The optical reader cannot read the
document.
You aborted transmission.
An error occurred during reception.
During reception, a printing error occurred.
Reception continued in the memory but the
space left in the memory was filled before
reception was completed.
The correspondent did not leave any
document in the ADF and did not set up his
fax machine for polling transmission.
A power failure occurred during
transmission or reception.
The document was received but the printing
quality is unsatisfactory.
The line is busy.
WHAT TO DO
No action.
Check that the fax machine is correctly
connected to the telephone line and that the
handset is not off the hook. Then try
connecting again.
Check that the correspondent's number is
correct.
Resume transmission from the page indicated
in the report.
Resume transmission of the pages indicated in
the report.
Split up the document to be sent.
Remove the document from the ADF and
reinsert it when it tries to connect.
No action.
Call the correspondent and ask him to send
you the document again.
Correct the fault and wait for the document in
the memory to be printed.
Call back the correspondent.
Resume transmission from the page indicated
in the report.
Call the correspondent.
Retry when the line is free.