Table of Contents
Advertisement
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At this
point, press the
key and repeat the procedure.
T
O CHANGE THE LENGTH OF THE ACOUSTIC SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for automatic recep-
tion with recognition of the type of call, it behaves
as follows:
•
if it is being called by a fax machine, it will automatically
prepare to receive a document after the preset number
of rings
•
if it is being called by a telephone, it will emit an acoustic
signal for a time of 20 seconds, after which, if you still
have not lifted the handset, it will automatically prepare
to receive a document.
If you want, you can change the length of the acoustic
signal as follows:
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows:
7. Press the key:
The display shows:
4 6
8. To view the other available values, "FAX/TEL TIMER -
15 SECS", "FAX/TEL TIMER - 30 SECS" or "FAX/TEL
TIMER - 40 SECS", press the keys:
9. To confirm your choice, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
T
O CHANGE THE REMOTE CONTROL CODE
If the fax machine is connected to an extension that
operates in tone dialling mode and is set up for manual
reception, whenever there is a call from a corre-
spondent wishing to send you a document, you can set
it to receive the document by typing the code * * on the
extension. This operation has the same effect as press-
ing the
key on the fax machine.
You can replace the second "asterisk" of this code us-
ing digits from 0 to 9.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows:
Advertisement
Chapters
Table of Contents
