To Enable/Disable Recognition Of The Ring; Frequency - Olivetti Fax-Lab 128 Instructions Manual

3. Press the keys
until the display shows:
4. Press the key:
The display shows the preset volume level, for exam-
ple 4:
5. To turn the volume up/down, press the keys:
Note: you can select levels 1 to 8 or the "DISABLED"
option. If you select "DISABLED", the fax will not emit
any rings.
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode,
press the key:
8. If you want to move back one function, press the key:
T /
O ENABLE DISABLE RECOGNITION OF THE RING

FREQUENCY

In some countries, local telephone companies offer the
possibility of assigning the same telephone line two
or more numbers, corresponding to different users.
When an incoming call is received, a different ring
frequency will indicate which user is to answer the
call.
This function is extremely useful at home or in small
offices, where the same telephone line is shared by
more than one person.
Your fax machine is capable of "learning" one of
these frequencies (see the procedure that follows).
In this way, when a call with the specific ring frequency
is received, the fax machine (in "PHONE/FAX" and
"TAD/FAX" reception modes) prepares exclusively to
receive a document.
This function is particularly useful when associated
with silent reception in that the fax machine will only
ring if the call is coming from a telephone.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. To view the other available option, "DISTINCT. RING -
SET PATTERN", press the keys:
7. To confirm the setting, press the key:
The display shows:
8. Call the fax machine with the desired frequency so that
the fax machine detects it.
The display shows:
9. To enable the new ring frequency, press the key:
The display shows:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. To return to the ring frequency selection step, press the
key:
The display shows:
12. To view the other available option, "SET OPTION -
NO", press the keys:
13. To confirm your choice, press the key:
14. To return the fax machine to its initial stand-by mode,
press the key:
15. If you want to move back one function, press the key:
4 5