Memory Function; Spin - Miele W 863 Operating Instructions Manual

If an additional option is selected for
a programme, and / or the spin op-
tion is altered, the machine stores
these changes in memory at the start
of a programme.
The memory function is active when the
machine is first delivered but can be
programmed to be switched off.
First select programming mode.
A The machine must be switched off
and the drum door closed. The
programme selector must point to
Finish .
B Press the additional option buttons
Short and Water plus at the same
time and hold pressed in and:
C . . . switch the machine on with the
I-ON/0-OFF-button.
D Let go of all these buttons.
The indicator light Main wash flashes in
the sequence display.
To de-select the "Memory" programma-
ble function turn the programme selec-
tor to
38
***.
As this programmable function is active
when the machine is first delivered, the
Rinses indicator light will come on in
the sequence display as soon as the
programme selector is turned to
DELICATES 30°C.
To deactivate the "Memory" function
press the START button and the light
will go out. The memory function is now
deactivated.
To store this setting in memory SWITCH
the machine OFF with the I-ON/0-OFF
button.
To reactivate the memory function re-
peat the procedure given above from
point A as far as the *** shown above.
Pressing the START button again will re-
activate the "Memory" function and the
Rinses indicator light will come on
again. The function is now reactivated.
Store in memory by pressing the I-ON/
0-OFF button.