Building Under A Worktop; Washer And Dryer Stack - Miele W 863 Operating Instructions Manual

^ A special building under conversion
kit* is required which includes a
cover plate to replace the machine's
lid.
^ Fitting instructions are supplied with
the conversion kit.
N.B. Cover plate
The cover plate must be fitted in place
of the machine's lid to ensure electrical
safety . However, if you wish to push
your machine under a worktop and
there is space to do this
, the conversion kit is not
necessary. Otherwise the conversion kit
is essential.
^ For installation under a work surface
900/910 mm from the floor, a raising
kit* is also required.
^ To ensure electrical safety the con-
version kit and raising kit must be fit-
ted by a suitably qualified installer.
^ Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
A Miele tumble dryer can be stacked
with the washing machine. A WTV
stacking kit* is necessary and can be
purchased from the Miele Spare Parts
Department.
* All parts marked with a * are available
from the Miele Spare Parts or Sales De-
partment, and must be fitted by a suit-
ably competent person according to
the instructions supplied with the kit.
55