Water Plus System - Miele W 863 Operating Instructions Manual

The Water plus button offers four op-
tions, increasing water level and / or
bringing in an extra rinse cycle. To
activate the option press the Water
plus button when selecting your wash
programme before pressing the
START button.
Increase in the rinse water level in the
COTTONS, MINIMUM IRON, QUICK
WASH and MIXED WASH - Poly/
Cottons programmes, where for exam-
ple rinse results are particularly impor-
tant.
Increase in the water level in all stages
of the COTTONS, MINIMUM IRON,
QUICK WASH and MIXED WASH - Poly/
Cottons programmes. It is particularly
suitable for fabrics that need special
care, or where extra attention must be
given to dissolving detergent. This op-
tion is already set when the machine is
delivered from the factory.
An extra rinse cycle is introduced to the
Cottons programme, e.g. when rinse re-
sults are particularly important.
Increase in the water level in all stages
of the COTTONS, MINIMUM IRON,
QUICK WASH and MIXED WASH - Poly/
Cottons programmes and adds an ex-
tra rinse cycle to the COTTONS
32
programme, e.g. when rinse results are
particularly important.
Before the "Water plus system" pro-
grammable function can be selected
you must first select programming
mode.
A The machine must be switched off
and the drum door closed. The
programme selector must point to
Finish .
B Press the additional option buttons
Short and Water plus at the same
time and hold pressed in and:
C . . . switch the machine on with the
I-ON/0-OFF-button.
D Let go of all these buttons.
The indicator light Main wash flashes in
the sequence display.
To select the "Water plus system" pro-
grammable function turn the
programme selector to -
. The indicator lights in the se-
quence display correspond to the four
options available. As Option 2 has been
set at the factory, when the programme
selector is turned Separate rinse , the in-
dicator light for Option 2 Rinse hold will
come on.