A Fault Indicator Light Comes On But The Wash Programme Continues As Normal - Miele W 863 Operating Instructions Manual

Check drain
Check inlet
Drain/Final spin
Anti-crease/Finish
46
The drain outlet is
restricted.
The water inlet is re-
stricted or the water
pressure is too low.
The filter in the inlet
hose is dirty.
The final spin has
not taken place. The
machine detected
an imbalance.
The position of the programme selector was al-
tered after the start of the programme. Turn the
programme selector back to the programme previ-
ously chosen.
Clean the fluff (drain) filter
and drain pump.
– make sure the stopcock is
opened wide enough.
– make sure the inlet hose is
not kinked.
Clean the filter.
– Loosen and re-distribute
the washing.
– Select the programme
Spin or Drain .
– Take into account the spin
speed of the relevant
programme.