Dip Switches - Symantec 460R - Gateway Security Installation Manual

Table D-3
LiveUpdate status
Writing new image to flash (seconds depend on firmware size).
Write complete - Briefly for 1 second before reset.
Appliance Resets - All LEDs flashed ON and end in normal operational
pattern.

DIP switches

DIP switches allow for manual intervention on the appliance to perform tasks like upgrading the firmware,
backing up your configuration, and using the serial port for maintenance operations. See Symantec
Gateway Security 400 Series Administrator's Guide for more information.
For normal operation, set all the DIP switches to the off (down) position.
LED states for LiveUpdate status (Continued)
LEDs and DIP switches
Power LED Error LED
(1) state (2) state
On Flashing
alternately
On On
On Off
49
DIP switches
Transmit
LED (3)
state
Flashing
alternately
On
On (flashing
for traffic)