Configuring The Appliance - Symantec 460R - Gateway Security Installation Manual

14 Installing the Symantec Gateway Security 400 Series

Configuring the appliance

To power your appliance
1
2
3
Configuring the appliance
Once you have completed the physical installation of the appliance, you must log in and begin system
configuration. The first time that you log in to the appliance, the Setup Wizard begins and guides you
through an initial configuration. Proceed to
Plug the power cord into the power socket on the back panel (6).
Connect the power cord from the appliance into an electrical outlet.
To turn on the appliance, press the power switch on the back panel (7).
The appliance power is functioning correctly if the LEDs on the front panel illuminate. See
DIP switches" on page 47.
"Running the Setup Wizard"
"LEDs and
on page 15.