Table of Contents
Advertisement
After placing the load with the pro-
tection, secure it by means of the
belt to prevent it from shifting in
case of sudden braking or collision.
To secure the protection with the
load:
1) Get the protection belt to pass
around the armrest.
2) Hold the belt tight by pulling its
end, while holding buckle A (fig.
209).
fig. 209
236
3) Secure the load by inserting the
attachment of belt A (fig. 210) into
the buckle of the central rear safety
belt.
fig. 210
To release the protection with the
load:
1) Release the belt by pressing the
button on the safety belt buckle.
2) Loosen the tension of the belt by
making the latter slide into buckle A
(fig. 211) while pressing button B.
3) Slip the protection belt from the
armrest and fold it up into its seat.
Close the flaps by pushing them
into their seat to locking.
fig. 211
Advertisement
Table of Contents
