Becker DTM High Speed 7910 Operating Manual page 20

Navigation Operation
The centre nearest to the entry appears in capital letters in the
centre list.
The scroll marks indicate that other centres in alphabetical or-
der can be selected.
Select the centre by turning the right rotary control
press to confirm.
Program switches to the Route menu.
Note: By pressing the right rotary control
2 seconds without previously entering a letter, a list of
the possible location centres will immediately appear.
98
Destination input via coordinates
If the geographical coordinates (latitude and longitude) of a
destination are known, these can be entered and route
guidance to the destination started.
and
for more than
To enter the coordinates of the destination, select
Press to confirm the selection.
Enter the latitude of the destination using the right-hand
rotary control
seconds and a direction as the crow flies, e.g.
To confirm the entry, press and hold the right-hand rotary
control
tick can also be selected and the right-hand rotary
control
LONGITUDE
Enter the longitude of the destination using the right-hand
rotary control
by turning the right-hand rotary control
. Entries must be made in degrees, minutes,
for more than 2 seconds. To confirm, the small
pressed briefly.
as described above.
.
.
11°38'34 N