Becker DTM High Speed 7910 Operating Manual page 16

Navigation Operation
Letters that have already been entered are displayed inverse-
ly. For the purpose of support, the name of the location closest
to the previous entry is displayed. The unit offers only the
possible remaining letters for selection. If no other entries are
available, the unit completes the place-name automatically.
To accept the entry, press and hold the right rotary control
for more than 2 seconds or select the small tick
press the right rotary control
If the complete location name has been entered or completed
automatically; i.e. the location entered exists only once in the
country of destination, the unit will switch automatically to
either the place selection list or the Road/ Centre entry.
If there are no streets or only the centre is available for a par-
ticular town, the unit will switch directly to the Route menu.
If an incomplete location entry was confirmed, the place se-
lection list is displayed.
94
and briefly
.
The name closest to the entry appears in capital letters in the
place-distinguishing list.
The scroll marks indicate that other locations in alphabetical
order can be selected.
A selection can be made by turning the right rotary control
and pressing to confirm. (See "General Instructions" on
page 90.)
If a definite entry is given, the switches to the Road/ Centre
Entry. If there are no streets or only the centre is available for
a particular town, the unit will switch directly to the Route
menu.
If the selection is unclear or ambiguous, the place-distin-
guishing list is shown.
Select the desired destination using the right rotary control
and press to confirm.
The program returns to the Road or Centre Entry.
If there are no streets or only the centre is available for a par-
ticular town, the unit will switch directly to the Route menu.