Becker DTM High Speed 7910 Operating Manual page 19

Entering the Destination Centre
  
With the right rotary control
confirm.
If the previously selected location has only one centre, the
program immediately switches to the Route menu.
If the number of centres is less than 10, the centre list is dis-
played.
Select the centre by turning the right rotary control
press to confirm.
If the number of centres is greater than 9, the program switch-
es to centre entry.
Select the letters one after the other by turning the right rotary
control and press to confirm. The selected letter appears
enlarged at the right of the display.
, select and press to
and
With the multifunction button
is deleted.
The complete entry can be deleted by pressing the multifunc-
tion button for more than 2 seconds.
Letters that have already been entered are displayed inverse-
ly. For the purpose of support, the existing entry is displayed
at the next centre to be reached. The unit offers only the pos-
sible remaining letters for selection. If no other entries are
available, the unit completes the centre-name.
To accept the entry, press and hold the right rotary control
for more than 2 seconds or select the small tick
press the right rotary control
Once the complete centre name is entered or automatically
completed, the program switches to the Route menu.
If the selection is not clear, the program switches to the Centre
list.
Navigation Operation
, the last letter confirmed
and briefly
.
97