Installation Of The Gsm/Gps Box - Becker Online Pro 7800 Installation Manual

Installation Guide

7. Installation of the GSM/GPS Box

The connectors for the combination GSM/GPS antenna, the optional operating headset and connecting cable to the
OnlinePro are to be connected to the GSM/GPS Box. The SIM card necessary for activation and operation of the telephone
must be inserted into the card-holding slot.
A
F
Side view,
left
The GSM/GPS Box can be installed in the glove compartment, for example. However, an installation position allowing a
maximum possible distance from the Online Pro should be selected.
On the housing of the GSM/GPS Box, there are two Velcro strips F for attachment.
Install the lead in such a manner that it cannot be pinched, bent or pulled out.
The GSM/GPS Box should be installed in such a way that the SIM card inserted into the SIM card holder can be taken out
without having to remove the GSM/GPS Box.
Subject to errors or technical changes
GSM/GPS Box
40
A: Retaining cover over SIM card holder
B: Connection socket for connection
cable to OnlinePro
B
C: Connection for optional
operating headset
F
D: GPS antenna connection
C
E: GSM antenna connection
F: Velcro strip for attachment
D
E
Side view,
right
Copyright by Becker GmbH, D-76303 Karlsbad