Advanced Chipset Setup - ECS IC41T-A User Manual

32
Boot Other Device (Yes)
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the First, Second and Third
boot devices.
ECS eJIFFY Function (Disabled)
Use this item to enable or disable the ECS eJIFFY Function. eJIFFY is ECS unique
software program for the quick access to the internet without entering O.S. Please
refer to Chapter 5 to know more about eJIFFY.
Press <Esc> to return to the main menu setting page.

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
DRAM Frequency
Configure DRAM Timing by SPD
Memory Remap Feature
HPET
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto
andwe recommend users leave the setting unchanged. Modify it at will may cause
thesystem to be unstable.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD
(SerialPresence Detect) is located on the memory modules, BIOS reads information
codedin SPD during system boot up.
Memory Remap Feature (Enabled)
This item allows users to enable or disable memory hole remapping.
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
Auto
Enabled
Enabled
Enabled
: Move Enter : Select F10: Save
+/-/: Value
F1:General Help F9: Load Default Settings
Using BIOS
Help Item
Options
Auto
800 MHz
1066 MHz
1333 MHz
ESC: Exit