ECS IC41T-A User Manual page 35

Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd3rd Boot Device (Hard Drive/CD/DVD/Removable Dev.)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Hard Disk Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Hard Disk Drives
1st Drive
: Move
F1: General Help
Press <Esc> to return to the Advanced Setup page.
CD/DVD Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
CD/DVD Drives
1st Drive
: Move
F1: General Help
Press <Esc> to return to the Advanced Setup page.
Hard Disk Drives
ST3250410AS Specifies the boot
sequence from the
available devices.
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
CD/DVD Drives
BENQ DVD DC DW1810 Specifies the boot
sequence from the
available devices.
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
31
Help Item
Help Item