Installing The Oven Into The Kitchen Cabinet - Baumatic MG1 Instruction Manual

IMPORTANT: When the above steps have been followed, it is
necessary to reassemble all of the components.
o You should pay particular attention to the wiring, it is important
to make sure that no wiring has been damaged during the door
reversal operation.
o You should ensure that all the electrical components and the
oven programmer work correctly before refitting the upper cover
of the oven.

Installing the oven into the kitchen cabinet

Ventilation
cut out.
Fixing the oven into a cabinet.
o Ensure that the aperture that you will be fitting the oven into is
of the size given in the above diagram.
o Ensure that the rear panel of the furniture housing unit has been
removed.
o This oven may be installed without any additional ventilation cut
outs being made in the housing unit. However the ventilation cut
out indicated by the arrow in the drawing above MUST be
present, otherwise the oven may overheat. This applies to a built
in or built under installation. Please see the next page for more
detailed information on the ventilation requirements that you will
need for your appliance to work properly.
27