Attaching The Embroidery Foot; Attaching The Embroidery Foot "Q - Baby Lock emore BLMR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX

Attaching the Embroidery Foot

This section describes how to attach the embroidery foot.

Attaching the embroidery foot "Q"

Attach the embroidery foot when embroidering. Have
the included embroidery foot "Q" and a screwdriver
ready.
2
a Embroidery foot bar
b Caught by the presser foot holder screw
CAUTION
● Always use the embroidery foot "Q"
when embroidering. If the wrong presser
foot is used, the needle may hit the
presser foot and break or bend.
a Press ("Needle Position" button) once or
twice to raise the needle.
a "Needle Position" button
The needle goes up.
b Turn off the machine.
76
1
1
CAUTION
● Before replacing the embroidery foot, be
sure to turn off the machine, otherwise
injuries may occur if
Stop" button) is accidentally pressed and
the machine starts embroidering.
c Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
d Hold the embroidery foot with your right
hand, as shown.
Hold the embroidery foot with your index
finger wrapped around the lever at the back of
the foot.
a Lever
/ ("Start/
a
a