Error Messages - Baby Lock emore BLMR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX

Error messages

When erroneous operations are performed messages and advice on operation will be displayed on the LCD.
Follow what is displayed. The message may disappear if the operation is performed correctly. The message will
disappear if is pressed while the message is displayed.
Error Message
82
There is a possibility that the data for the selected pattern is corrupted.
Either the "Start/Stop" button was pressed at a screen other than the
embroidery screen.
Upper thread broken.
Upper thread not set up correctly.
Upper thread has run out.
CAUTION
Be sure to rethread the machine. If you press the "Start/Stop" button
without rethreading the machine, the thread tension may be wrong or
the needle may break and cause injury.
The machine is deleting a previously saved pattern.
While embroidering, data is written to the "Removable Disk" in the
connected computer or data is deleted from the "Removable Disk".
on the LCD was pressed when no card was inserted.
The "Start/Stop" button or "Thread Cutter" button was pressed while the
embroidery foot was raised.
The memory is full and the stitch or pattern cannot be saved.
You pressed the back key or the embroidery key while a pattern was
selected.
You tried to select an embroidery pattern or change the layout when
the needle was down.
The machine is turned on while the needle is lowered and the
embroidery unit is attached.
This message is displayed when the embroidery unit is trying to
initialize while the embroidery foot is lowered.
When 13 or more patterns are in "Removable Disk", a pattern was
being retrieved.
Probable Cause