Winding/Installing The Bobbin; Bobbin Precautions; Winding The Bobbin - Baby Lock emore BLMR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY

Winding/Installing the Bobbin

This section describes how to wind the poly 90 weight bobbin thread onto the bobbin, and then insert the
bobbin thread.

Bobbin precautions

Be sure to observe the following precautions concerning the bobbin.
CAUTION
● Only use the Bobbin (part code: X52800-120) designed specifically for this machine. Use of
any other bobbin may result in injuries or damage to the machine.
● The included bobbin was designed specifically for this machine.
If bobbins from other models are used, the machine will not operate correctly. Use only the
included bobbin or bobbins of the same type (part code: X52800-120).

Winding the bobbin

Wind the poly 90 weight bobbin thread around the bobbin to prepare the bobbin thread.
a Bobbin winder
Memo
The order that the machine should be threaded for winding the bobbin is indicated by a broken line on
the machine. Be sure to thread the machine as indicated.
26
11.5 mm
(7/16 inch)
This model
Actual size
Other model
1