Specifications - Honda FG110 Owner's Manual

Air Index
An Air Index Information hang tag/label is applied to engines certified to an emission durability time period in
accordance with the requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to compare the emissions performance of
available engines. The lower the Air Index, the less pollution.
The durability description is intended to provide you with information relating the engine's emission durability
period. The descriptive term indicates the useful life period for the engine's emission control system. See your
EMISSION CONTROL SYSTEM WARRANTY (page 41) for additional information.
Descriptive Term
Moderate
Intermediate
Extended
The Air Index Information hang tag/label must remain on the tiller until it is sold. Remove the hang tag before
operating the tiller.

SPECIFICATIONS

Model
Type
Description code
Displacement
Bore & stroke
Compression ratio
Cooling system
Ignition system
Ignition timing
Spark plug
Carburetor
Air cleaner
Lubrication system
Oil capacity
Recommended operating ambient temperature
Starting system
Stopping system
Fuel used
Fuel tank capacity
PTO shaft rotation
TECHNICAL & CONSUMER INFORMATION
Applicable to Emissions
Durability Period
50 hours (0–80 cc inclusive)
125 hours (greater than 80 cc)
125 hours (0–80 cc inclusive)
250 hours (greater than 80 cc)
300 hours (0–80 cc inclusive)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
ENGINE
4-stroke, overhead cam, single cylinder
1.4 x 1.0 in (35 x 26 mm)
Transistorized magneto
30° B.T.D.C. (Fixed)
23°F ~ 104°F (-5°C ~ 40°C)
Ignition primary circuit ground
Unleaded gasoline with a pump octane rating of 86 or higher
0.15 US gal (0.57 )
Counterclockwise (from PTO shaft side)
GX25
GCAAM
1.5 cu in (25 cc)
8.0:1
Forced-air
CMR5H (NGK)
Diaphragm type
Semi-dry type
Oil mist
2.7 US oz (80 cc)
Recoil starter
35