Using Speedcall; Changing Personal Speedcall Numbers - AT&T Spirit Communications System User Training Workbook

Using SpeedCall

Now that you have stored a few numbers, let's try calling them.
For a 6-Button Phone:
ACTION
1. Press the MEMORY button.
2. Dial the two-digit code that goes
with the number you want to reach.
Use this procedure for calling
Personal and System SpeedCall
numbers.
For a 24-Button Phone, Personal SpeedCall Numbers:
1. Press the auto-dial number of the
party you want to reach.
For a 24-Button Phone, System SpeedCall Numbers:
1. Press the MEMORY button.
2. Dial the two-digit code of the party
you want to reach.
NOW YOU TRY IT . . .
Try the numbers you stored (previous page). Follow the appropriate steps
above depending on whether you have a 6- or 24-button phone.

Changing Personal SpeedCall Numbers

It is likely that numbers you call most frequently will change over time. To change a
Personal SpeedCall number simply program over the existing number. The procedure is
exactly the same as that used originally to store Personal SpeedCall numbers.
The speakerphone automatically
comes on. If you want to use the
receiver, lift it.
You will be connected with that party
as if you had dialed the actual
number.
You will be connected as if you had
dialed the actual number. The
speakerphone will automatically turn
on. If you want to use the receiver, lift
it.
Speakerphone automatically turns on.
If you want to use the receiver, lift it.
You will be connected as if you had
dialed the actual number.
32
SpeedCall
OUTCOME