AT&T MERLIN LEGEND Release 2.0 Data User's Manual page 69

Making and Answering Data Calls
Dialing In From An Outside Data
Station Through a Modem Pool
To dial an inside data station from a data station located in
another building or off-site, you would use the same two-stage
dialing method.
For the first stage, you dial the telephone number for the
appropriate modem pool or the number for the data hunt
group that provides access to the appropriate modem pool.
When you receive confirmation that you are connected, you
use the second stage dialing procedure of the appropriate
modem pool as described in this chapter.
For example, assume you are using an outside digital data
station to call an inside analog data station. You would call
the digital-to-analog modem pool, using either the telephone
number or the data hunt group number for that modem pool.
When your first stage dialing is confirmed, you would use the
second-stage dialing steps for calling an inside analog data
station provided under "Calling Through a Digital-to-Analog
Modem Pool". This would complete your connection.
Making Data Calls Through a Modem Pool
3-37