AT&T MERLIN LEGEND Release 2.0 Data User's Manual page 40

Making and Answering Data Calls
To Call Outside Analog Data Stations
There are two ways to dial outside lines depending on the
system operating mode:
If your analog multiline telephone has SA buttons and
you place an outside data calls using an SA button,
you must dial a dial-out code before the telephone
number. When you place the call on data stations
where you use the terminal keyboard to make the call
and you press
an SA button is automatically selected. Your dialing
sequence must still include a dial-out code before the
telephone number.
If your telephone has ICOM buttons and you place
outside data calls using an analog multiline telephone,
you must select a button labeled with a personal line
number to make an outside call. Dial-out codes are
not needed. (See your telephone user's guide for
details on line buttons. ) When you place the call on
data stations where you use your terminal keyboard
make the call and you press
dialing sequence, an ICOM button is automatically
selected. You can select an outside line assigned to
your data station from an ICOM button by dialing the
dial-out code (usually 9). Ask your system manager for
the appropriate dial-out code.
Making Analog Data Calls
3-8
after typing the dialing sequence,
[ ]
[
after typing the
]
to