System Inventory - AT&T MERLIN LEGEND Communications System Release 2.0 Maintenance And Troubleshooting Manual

Error Logs, the Access Log, and System Inventory
Step
3
SysProg/Maint AccessLog>
Date
mm/dd/yy hh:mm xxxx xx
mm/dd/yy hh:mm xxxx xx
mm/dd/yy hh:mm xxxx xx
mm/dd/yy hh:mm xxxx xx
Exit
Reading the Access Log Screen
The Sta column indicates whether the event occurred from an MLX-20L
console (if so, the extension number is displayed) or from SPM (
direct; if remote).
SPMR
The column indicates whether the event originated from System
/
SP M
Programming (
Scanning the Log
The last 20 events are shown, beginning with the most recently accessed
event. To page through the events, press More.
When you reach the end of the list, you will hear a beep and all variable
information will be cleared from the screen. To return to the beginning of the
list, select Exit and then select Access Log again.

System Inventory

If you need to contact your technical support organization, you may need to
access the System Inventory screen. Doing so shows you the hardware
vintage, software vintage, and ROM ID for each module in the control unit.
2-22 System Inventory
Display
Time Sta SP/M
) or Maintenance (
SP
Instructions
The first screen of the Access Log
appears.
Each event is documented by the time and
date of occurrence.
).
M
if
SPMD