Sb1394 Interfaces; Interfaces; Sound Blaster Audigy (Non-Sb1394) Card; Audio Inputs - Creative Sound Blaster Audigy SB1394 User Manual

SB1394 Interfaces

The 6-pin SB1394
connector/port has a 2 watt
maximum power output.
Connect only one high power
usage device such as the
IEEE 1394 hard disk and CD-
RW drive to this port unless
it is self-powered.

Interfaces

Sound Blaster
Audigy (non-
SB1394) card

Audio Inputs

❑ Stereo headphone (32-ohm load) support on Front Line-Out
❑ One 2 x 5 pin Internal SB1394 connector (J6) on card for connection to the Audigy
Extension card (with Audigy Drive upgrade option available only on some models)
❑ One 6-pin SB1394 connector/port on rear bracket
❑ VOL_CTRL 1 x 4 pin header
❑ PC_SPK (PC speaker) 1 x 2 pin header
❑ AUD_EXT 2 x 20 pin header for connection to Audigy Drive (upgrade option,
available only on some models)
❑ JOYSTICK 2 x 8 pin header for connection to the Joystick/MIDI connector
(optional attachment: metal bracket bundled with some models)
❑ One line-level analog Line input via stereo jack on rear bracket
❑ One mono Microphone analog input via stereo jack on rear bracket
❑ CD_IN line-level analog input via 4-pin Molex connector on card
❑ AUX_IN line-level analog input via 4-pin Molex connector on card
General Specifications A-4