For Windows 2000 And Windows Xp - Creative Sound Blaster Audigy SB1394 User Manual

For Windows 2000
and Windows XP
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel dialog box, double-click the System icon.
3. In the System Properties dialog box, click the Hardware tab.
4. Click the Device Manager button.
5. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
6. Right-click the disk drive icon. A menu will appear.
7. Click Properties.
8. In the Digital CD Playback box of the next dialog box, click the Enable digital
CD audio for this CD-ROM device check box to select it.
Panning a source sometimes turns off its sound.
This occurs when you are in the Digital Output Only mode and the source's left-right
balance in a software mixer application other than Surround Mixer (for example, the
Windows Volume Control application) is at the opposite end compared to the
position to which you have panned the source in the Main panel of Surround Mixer.
For example, the CD Audio balance in Windows Volume Control is on the left but in
Surround Mixer you have panned the CD Audio to the right.
To solve this problem:
Open that other mixer, and center the balances for all the audio input sources.
This ensures that your analog sources will not turn silent when you pan them in
Surround Mixer.
Troubleshooting B-5