For Windows 98 Se; For Windows Me - Creative Sound Blaster Audigy SB1394 User Manual

For Windows 98 SE

For Windows Me

❑ The Speaker selection in the Main panel of Surround Mixer corresponds to your
speaker or headphone configuration.
❑ The Original Sound sliders in either or both the Master and Source tabbed
pages of the EAX Control Panel application are set to 100%.
No audio output when playing audio CDs or DOS games that require a CD-ROM.
To solve this problem, do one of the following:
❑ Make sure the Analog Audio connector on the CD-ROM drive and the CD In
connector on the audio card are connected.
❑ Enable digital CD playback:
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel dialog box, double-click the Multimedia icon.
3. In the Multimedia Properties dialog box, click the CD Music tab.
4. Click the Enable digital CD audio for this CD-ROM device check box to select
it.
5. Click the OK button.
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel dialog box, double-click the System icon.
3. In the System Properties dialog box, click the Device Manager tab.
4. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
5. Right-click the disk drive icon. A menu will appear.
6. Click Properties.
7. In the Digital CD Playback box of the next dialog box, click the Enable digital
CD audio for this CD-ROM device check box to select it.
8. Click the OK button.
Troubleshooting B-4