Connecting Related Peripherals - Creative Sound Blaster Audigy SB1394 User Manual

Connecting
Related
Peripherals
Analog/Digital Out connector
Analog Mode (default): Connects to Center and
Subwoofer channels.
Digital Mode: Connects to digital speakers* (via
the miniplug-to-DIN cable, which is included with
your speakers), MiniDisc or DAT
For instructions on how to switch
between digital and analog modes, refer
to topic "Digital Output Only" of the
Creative Surround Mixer online Help.
Cassette and CD player,
Synthesizer, etc.
Microphone
Connects to analog front and rear inputs of
speakers.
Line Out + Rear Out: Connects to
4-channel speakers.**
Line Out: Connects to 2-channel speakers and
headphones.
Connects to all IEEE 1394 compatible devices such
as the IEEE 1394 Creative digital audio player, DV
camcorder, WebCam and digital camera.
Sound Blaster Audigy will give you endless hours of listening pleasure. Figure 1-7
shows you how to connect related peripherals to your Sound Blaster Audigy
(SB1394) and Figure 1-8 shows you how to connect related peripherals to your
Sound Blaster Audigy (non-SB1394) to optimize your enjoyment.
Line-out
Figure 1-7: Connecting other devices to the Sound Blaster Audigy (SB1394) card.
CD-ROM/DVD-ROM drive
MPC-to-MPC (4-pin)
Analog CD audio cable
Line In
Line Out
Mic In
Rear Out
SB1394
port
Sound Blaster
Audigy (SB1394)
card
Joystick/MIDI
bracket***
Game pad
MPC-to-MPC (2-pin)
Digital CD audio cable
* For example,
Creative Inspire 5.1
TM
Digital Speakers
** For example, 4-
channel Creative or
Cambridge
SoundWorks analog
speaker systems
***Bundled with some
models of Sound
Blaster Audigy card.
Installing Hardware 1-9