AT&T Merlin II Feature Module 2 System Manual page 167

Touch-Tone Enable
DESCRIPTION
CONSIDERATIONS
PROGRAMMING
HOW TO USE
If you have telephone lines that carry rotary signals, use the Touch-Tone
Enable feature to switch to Touch-Tone signals midway through a dialing
sequence. This lets you take advantage of bank-by-phone, credit card
authorization, and alternate long distance services,
This feature is for rotary lines only.
NOTE:
Once you touch the Touch-Tone Enable button, all remaining digits of the
number generate Touch-Tone signals. However, if you touch Recall during
this sequence, the line will return to rotary pulses.
To program a Touch-Tone Enable for your voice terminal, label
enter programming mode, and follow these steps:
1 Touch the button you want to program.
2 Dial *76.
3 Program another feature,
To
switch from rotary pulses
1 Lift your handset.
2 Dial the first part of the number.
3 Touch Touch-Tone Enable.
4
Dial the remaining numbers.
When you hang up your handset, the Touch-Tone feature automatically
turns off,
or leave programming mode.
as you dial a number:
to Touch-Tone signals
MERLIN II System Features 2-161
button,
a