AT&T Merlin II Feature Module 2 System Manual page 162

HOW TO USE
.
System Type
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
2-156 MERLIN II System Features
You can program a button or use a dial code to access this feature.
To dial an outside number:
1 Lift your handset.
2 Touch the System Speed Dial button or dial the appropriate code
(#60 through # 99).
As part of basic administration, you must specify whether the system is
square, behind-switch, or pooled.
If the system is pooled, you must specify the method used to access line
pools: Button Access, Dial Access, or Automatic Route Selection (ARS).
If the system has Button
line in a pool.
If the system has Dial Access to Line Pools, people touch a Pool Access
button and then dial the appropriate line pool code to get a line in a pool.
If the system has Automatic Route Selection (ARS), the system
automatically selects an administered route for each outside call that
people make using a Pool Access button.
If you change the system type at a later time, you erase all system line
administration and voice terminal programming. You will then have to
reassign all lines and reprogram all voice terminals.
If you change the system from Button Access to Dial Access to Line Pools,
or vice versa, the system automatically assigns a different function to the
two buttons above Intercom-Voice. If you change the system to Button
Access, the main pool (default Pool 9) is automatically assigned to the two
buttons above the Intercom buttons. If the main pool was previously
assigned to any other button on that voice terminal, it is automatically
removed.
To specify the system type, enter administration mode and follow the
appropriate procedure, below.
With a MERLIN II System Display Console
1 From the administration menu, touch
2 Touch the appropriate button for the preferred type of system:
For a square or pooled system, touch the button for that system
(
[Square], ButnAcc], [ARS], [DialAcc]
For a behind switch system, touch
message "System is Re-starting" appears, then the administration menu.
people touch a button to get a
Access to Line Pools,
[System], [Type].
)
[More], [BehindSw].