Reminder Service - AT&T Merlin II Feature Module 2 System Manual

Reminder Service

DESCRIPTION
2 Dial number to specify timer interval:
0 = 350 milliseconds
1 = 450 milliseconds
2 = 650 milliseconds
3 = 1 second
3 Touch .
[Enter]
4 Touch Conference to return to the administration menu or leave
administration mode.
With a BIS-34D Console
1 Touch Message.
2 Dial the 5-character code for the Recall Timer Interval you prefer:
#3180 for 350 milliseconds
# 3181 for 450 milliseconds
# 3182 for 650 milliseconds
# 3183 for 1 second
3 If you have a printer, you can verify that the delay is set correctly by
checking your System Information Report. To get a printout, dial #905
and wait for the beep.
4 Touch Message and go on to another procedure, or leave administration
mode.
With Reminder
Service activated, the system places calls to voice terminals at
This feature is useful for attendants and others in the system
a preset times.
who the system to alert several voice terminals at preset times, such as
want
just before meetings. And people whose voice terminals don't have displays
can use Reminder Service as a substitute for the local alarm clock feature.
When Reminder Service is in effect for a voice terminal, the system places an
intercom call to the voice terminal at or close to a preset time. The call rings
for 30 seconds or until the user answers. At that point, the reminder is
canceled. When the user answers, he or she hears a series of Touch-Tones.
Users can set their voice terminals to ring at particular times and can cancel
their own reminders. Attendants can set a reminder time for any voice
terminal in the system and can cancel any reminders. People can use dial
codes or program buttons for Reminder Set and Reminder Cancel.
The administrator can set a single reminder Cancel-All time, such as the end
of the business day. With this feature in place, all reminders are canceled at
that time every day.
MERLIN II System Features
2-135