Acquiring The Waveform - Fluke 123 User Manual

Changing the TrendPlot Reading
To toggle the TrendPlot reading between MIN (minimum),
MAX (maximum), and AVERAGE, do the following:
Change MIN into MAX reading.
Change MAX into AVG reading.
Note that the date and time stamp now updates
continuously to indicate the most recent change in a
reading.
Turning Off the TrendPlot Display
Turn TrendPlot off again.

Acquiring the Waveform

Making a Single Acquisition
To catch single events, you can perform a single shot.
(One time screen update.) To set up the test tool for a
single shot on the input A waveform, do the following:
•
Connect the probe to the signal to be measured.
Open the SCOPE INPUTS menu.
Open the SCOPE OPTIONS
submenu.
Highlight SINGLE SHOT.
Accept the set up for a Single
(2x)
Shot.
Using The Test Tool
Acquiring the Waveform
1
23