Installing Crossfirex™ Graphics Cards - ECS P45T-A Manual

48
TM
Installing CrossFireX graphics cards
1. Insert the CrossFireX TM graphics cards into the PCIE16X_1 and PCIE16X_2 slots.
Make sure that the card is properly seated on the slot.
2. Connect an external cable to the CrossFireX TM ready graphics card installed on the
PCIE16X_2 slot.
External Cable
3. Connect the two CrossFireX TM Edition graphics cards installed on PCIE16X_1 and
PCIE16X_2 slots with the CrossFire Bridge.
4. Connect the external cable to the corresponding port on your monitor.
5. Connect an auxiliary power source from the power supply to the graphics cards.
ATI CrossFireX Technology Support
TM