Technology Support; Requirements; Installing Crossfirex Tm Graphics Cards - ECS Z97-PK User Manual

Chapter 6
AMD CrossFireX
This motherboard supports the AMD CrossFireX
install multi-graphics processing units (GPU) graphics cards. Follow the installation
procedures in this section.

Requirements

1 Two identical CrossFireX
of 2-way CrossFireX
2 You would need one CrossfireX
3 Make sure that your graphics card driver supports the AMD CrossFireX
technology. Download the latest driver from the AMD website
(www.amd.com).
4 Make sure that your power supply unit (PSU) can provide at least the mini-
mum power required by your system.
Installing CrossFireX
1. Insert the CrossFireX
sure that the card is properly seated on the slot.
2. Connect the cable from your monitors to the CrossFireX
installed on the PCIE16X slot.
Monitor Cable
3. Connect an auxiliary power source from the power supply to the graphics cards.
TM

Technology Support

TM ready graphic cards are needed for the setup
TM configuration.
TM bridge cable.
TM
graphics cards
TM graphics cards into the PCIEX16/PCIEX16_S1 slots. Make
* For reference only
Z97-PK USER MANUAL
TM
Technology that allows you to
TM ready graphics card
TM
75