Installing Crossfirex™ Graphics Cards - ECS X48T-A Manual

52
TM
Installing CrossFireX graphics cards
1. Insert the CrossFireX TM graphics cards into the PCIEX16 and PCIEX16_C slots.
Make sure that the card is properly seated on the slot.
2. Connect an external cable to the CrossFireX TM ready graphics card installed on the
PCIEX16_C slot.
External Cable
3. Connect the two CrossFireX TM Edition graphics cards installed on PCIEX16 and
PCIEX16_C slots with the CrossFire Bridge.
4. Connect the external cable to the corresponding port on your monitor.
5. Connect an auxiliary power source from the power supply to the graphics cards.
ATI CrossFireX Technology Support
TM