Mb Intelligent Bios) - ECS P45T-A Manual

38
M.I.B. (MB Intelligent BIOS)
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Manufacturer: Intel
Ratio Actual Value: 8
CPU Frequency Setting :
Over-clocking Function.
Auto Detect DIMM/PCI CIK
Spread Spectrum
Memory Current Type: CL5/Trcd5/Trp5/Tras16
DRAM Frequency
Configure DRAM Timing by SPD
CPU VOLTAGE
Memory Voltage
< >
Manufacturer: Intel
This item displays the information of current manufacturer of the CPU installed in
your computer.
Ratio Actual Value: 8
This item shows the actual ratio of the CPU installed in your system.
CPU Frequency Setting (333MHz)
This item is used to set the CPU Frequency.
Over-clocking Function. (Disabled)
This item decides the CPU over-clocking function/frequency installed in your sys-
tem. If the over-clocking fails, please turn off the system power. And then, hold the
PageUp key ( similar to the Clear CMOS function) and turn on the power, the BIOS
will recover the safe default.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Memory Current Type
This item is used to show the current memory type.
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
M.I.B. (MB Intelligent BIOS)
333MHz
: Disabled
Enabled
Enabled
Auto
Enabled
Normal
1.90V
: Move Enter : Select
+/-/: Value F10: Save ESC: Exit
F1: General Help
F9: Load Default settings
Using BIOS
Help item
Options
Disabled
Enabled