Connecting The Power Cord - Brother BE-438D Instruction Manual

3. INSTALLATION

3-14. Connecting the power cord

<Single-phase
specifications>
<Three-phase
specifications>
21
Green/yellow wire
(Ground wire)
<For single-phase specifications>
Insert the power cord plug (1) into a wall outlet.
<For three-phase specifications>
1. Attach an appropriate plug to the power cord (2). (The green
and yellow wire is the ground wire.)
2. Insert the power plug into a properly-grounded AC power
supply.
* The inside of the control box uses single-phase power.
NOTE:
・ If the ground connection is not secure, electric shocks,
operating errors or damage to electronic components such
as P.C. boards may occur.
・ Do not use extension cords. They may cause problems with
correct operation of the sewing machine.
4114M
KE-430D, BE-438D