Table of Contents
Advertisement
3. Setup of the B-10 Mobile LED
Image 3-2
Contact key and power cable of pump
2. After several seconds turn-on the generator with this contact key.
Caution:
The generator of the B-10 Mobile LED needs to be well-ventilated. Therefore, the generator of the B-10 Mobile LED
is not indented to run for a long period of time with the roof closed. Once the generator is running, the screen needs
to be lifted immediately.
3. Insert the power cable of the hydraulic pump in the generator (Red-plug)
4. Connect the grounding conductor to a grounding rod or other acceptable earth grounding method.
3.3
Extending the LED display
Extending process
1. Open the air arrival to start the pump.
22
R5976956 B-10 MOBILE LED 19/06/2007
Advertisement
Table of Contents
