Table of Contents
Advertisement
2. SYSTEM OVERVIEW
Overview
•
Introduction
•
B-10 Mobile LED tiles
•
LED Pro
•
B-10 Mobile LED trailer
•
B-10 Mobile LED generator
2.1
Introduction
Overview
The B-10 Mobile LED is a mobile outdoor LED display solution. The LED-wall comes in a trailer that can be pulled by a vehicle with
a 3500 kg towing capacity. All electronics are stored properly and compact when traveling.
Image 2-1
Trailer side view
LED tiles used in the B-10 Mobile LED are SLite10 XP tiles with pixel pitch of 10mm, in a 4x4 configuration (9.6m2 - 103.3ft2) and
typically designed for outdoor use.
When arriving on the event location, the B-10 Mobile LED can easily be set up. The wall itself slides out of the trailer by means of a
hydraulic system. There is no need for trusses and structures to be set up. The screen can be turned around 360 degrees, allowing
you to adjust the display to face the audience.
The B-10 Mobile LED contains a diesel-fueled generator. No external power supply is required, and it comes with a Barco LED-PRO
or D320 Digitizer for high quality image processing.
The following topic enumerates all different components of a B-10 Mobile LED solution and describe their
functionality in the system. FOR MORE DETAILED INFORMATION ON THESE COMPONENTS PLEASE REFER
TO THEIR RESPECTIVE MANUAL.
2.2
B-10 Mobile LED tiles
2.2.1
Functionality
Overview
The B-10 Mobile LED is with outdoor SLite 10 XP tiles. The SLite XP can overlay video and data sources in their native quality.
A unique video processing feature enables the creation of a visual resolution quasi double the physical resolution defined by the
cluster of LED's spread on the surface of the display. The SLite XP is an IP65 rating rugged module.
R5976956 B-10 MOBILE LED 19/06/2007
2. System Overview
9
Advertisement
Table of Contents
