Using Menus
Further detailed adjustments and settings can be made using the menus.
There are two methods for menu operations; using the operation panel and using a mouse.
The method using a mouse is discussed here.
Lights
Gain
WBset
Sharp-
Iris
Fit/
Change
Save to
Save to
Lights
Gain
WBset
Tone
Reverse
Color
ness
A/M
Over
Pointer
card
Server
1
Display menus.
Right-click on the area in the upper one-fifth of the screen.
Screen of the connected monitor
or projector
2
Select the menu icon.
Move the pointer onto the menu icon to be selected.
The status (settings of the menu items, etc.) of the menu
is displayed beneath the icon.
3
Execute the selection.
Click the left mouse button.
You can now change setting values on the selected menu.
• For details on each menu setting, refer to pages 24 to 31
of the User's Manual.
Tone
Reverse
arp-
Iris
SXGA
Test
/XGA
ness
A/M
Right-click
on this area.
Iris
Sharp-
Color
A/M
ness
Fit/
Change
Over
Pointer
Major menu icons
L Tone
To adjust the picture tone.
• Natural:
• Linear1:
• Document: For documents with fine characters
• Linear2:
• Picture:
L Sharpness
To adjust the image contours, which can be adjusted
in 6 steps.
L Iris A/M
To alternately select automatic and manual iris
adjustments for the camera. Normally select Auto.
• Auto Exp. ON:
• Auto Exp. OFF:
Use the BRIGHTNESS +/- buttons on the operation
panel 2 when adjusting the brightness.
L Save to Card
To save image data on a PC card.
Set "File Type" of "Timer ... Setting" of the Setup menu
in advance.
L SXGA/XGA
To switch the output mode.
Save to
Save to
SXGA
Card
Server
/XGA
For ordinary documents
To output an image as-is without
compensation
For glossy documents (the brightness will
be decreased.)
For photos and colour printed matters
To activate the Auto Iris function
To deactivate the Auto Iris function
Setup