Memory Functions - Bernina Artista 165 Instruction Manual

40 Memory
Editing memory contents

Memory functions

Back to stitch screen
· touch esc
· the screen reverts to the stitch
screen which includes the selected
stitch
· the selected stitch is activated
(highlighted)
Stitches with functions
· stitches can be modified after being
programmed into memory
· program the first two stitches
normally
· touch edit
· all available functions appear in the
top right section of the screen
· the last stitch in memory (left of
cursor) appears above the editing
functions
Inserting functions, e.g. mirror image
· place the cursor to the right of the
stitch to which mirror image is to be
applied
· touch edit
· select mirror image in the functions
screen
· the stitch will be shown in mirror
image
Visible functions (in memory bar)
· the securing function appears as a
function in the memory bar
· delete unwanted functions from the
memory bar before continuing with
programming
· touch edit to close functions
The following functions become
available in the center of the screen
when the edit function of the
memory feature is selected. All
functions on the toolbar (except del)
Motor Speed
030787.52.04_0401_a165_EN
· the same procedure for insertion
applies to all functions
· touch edit to close
will become inactive when the edit
function is selected and will
reactivate when the edit function is
closed. For more information on
these functions, see pages 27.
Long Stitch