Quick Reference Guide - Escort Solo S3 Owner's Manual

Quick Reference Guide

To begin using the Solo S3, just follow these simple
steps:
1 Install (2) AA batteries (included) in the battery
compartment. (Please note polarity)
2 Mount your Solo S3 on the windshield using the
supplied windshield mount.
3 Press the Power button (PWR) located on the left
side of the front panel.
4 Adjust the volume (VOL) by pressing the up and
down buttons located to the right of the display.
Please read the manual to fully understand Solo
S3's operation and features.
6
Radar Antenna and Laser Lens
The rear panel of your Solo S3 should have a clear
view of the road ahead. For best performance,
do not mount Solo S3 directly behind
windshield wipers or tinted areas.
Graphic OLED Display
During an alert, the display will turn on and
indicate radar band, and a precise bar-graph of
signal strength. Programming options and SWS
messages are also displayed.
NOTE: When using Solo S3 in battery mode, the
display will turn off automatically until a signal is
detected, or you enter program mode. This maximizes
battery life. When using the optional 12-volt
SmartCord, the display will remain on and provide
several pilot options for power-on indication. Page 16
7