Delay Start Feature - Danfoss TP5000 si range Installation And User Instructions Manual

Changing the clock forwards and backwards
GB
This is handled automatically, however, if the manual changeover has
been selected (User Advanced Programming step 3 on page 26) follow
the instructions below.
To change from Summer to Winter (clocks back)
With clock display showing, press and hold - button until time moves
back.
To change from Winter to summer (clocks forward)
With clock display showing, press and hold + button until time moves
forward.
Remote override into and out of thermostat mode
Selected models are available with a feature which allows a telephone
activated switch or window contacts to step the unit into or out of
thermostat mode.
The required temperature to be maintained when the building is
unoccupied, or when windows are open, must fi rst be set up in User
Advanced Programming, step 10, (page 27).
To locally override this feature press both Λ and V together.

Delay start feature

Your thermostat includes an optional delay start feature to hold off
the heating for a time on mild days when the room temperature at the
start of an event is close to the programmed value. If you have enabled
this function it can be overridden by pressing either Λ or V buttons.
To enable this feature, please refer to User Advanced Programming,
step 11, (page 27).
When this function is active, the set temperature will fl ash on the
display and an hourglass symbol will be displayed.
24