Before You Start; Choice Of 24Hr Or Am/Pm Display; Setting The Date And Time - Danfoss TS715Si User Manual

1.3 Before you start

Open the fl ap on the front of the clock. Press the RESET button using
a non-metallic object (e.g. pencil/matchstick) until you hear a click
and the red light on the front of the unit comes on and the LCD goes
blank.
This will reinstate the preset programmes
and sets correct day and time.
To fully reset the unit see page 19.

1.4 Choice of 24hr or AM/PM display

Press and hold DAY/HOL and NEXT ON/
OFF for 2 seconds to toggle between
24hr clock and AM/PM display, as
required.

1.5 Setting the Date and Time

These settings
manufacture and only need to be
changed in the unlikely event that the
unit has lost the settings.
Setting the Date
Press and hold PROG for 5 seconds to
display year.
Use the + or - buttons to set the correct
year.
Danfoss Heating
are made during
GB
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
7