Programming The On/Off Times In 5/2 Day Mode - Danfoss TS715Si User Manual

1.7.1 Programming the On/Off times in 5/2 day
mode
1. Press PROG once until SET ON TIME
appears at the top of the display
GB
and MOTUWETHFR appears at the
bottom of the display.
Use the + or - buttons to set the
time you would like your system to
fi rst come on in the morning (Event
1).
2. Press NEXT ON/OFF once only.
Use the + or - buttons to set the
time you want your system to go off
(Event 2).
To move to the next setting, i.e.
when you would like your system to
come on again (Event 3) press the
NEXT ON/OFF button again.
3. Continue programming the system
ON and OFF times for weekday
Events 4, 5 and 6 as in Step 2.
4. Press the DAY/HOL button once
and SASU will appear at the bottom
of the display.
10
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
TS715SI