Fitting The Feet/Wheel Kit - Clarke Power FG2000 Operation & Maintenance Instructions Manual

FITTING THE FEET/WHEEL KIT

1. Lay the generator on its front end
and attach the 2 feet as shown.
2. Fix each foot to the frame using
4 x Short Bolts & 4 x 12mm nuts.
3. Fix the axles to the frame as
shown and secure the inside end
using a flat washer and 19mm nut
provided.
4. Slide both wheels on to the axles.
NOTE: Make sure that the valve on
each wheel is on the
outside.
5. Secure the wheel to the axle using
a flat washer and 19mm nut
provided
6. Carefully place the generator
onto its wheels/feet.
9